LASER (TDLAS) GAS ANALYZER
Zycor SO2/NO2/CO2 Analyzer
Zycor NO/H2O Analyzer
Laser (TDLAS) Gas Analyzer
Zirconia Oxygen Analyzer
Universal Controller / Transmitter
Conductivity Sensor
TDS Sensor
PH ORP Transmitter
PH Sensor
ORP Sensor
COD, BOD, TSS, TOC Analyzer
Online High Range Turbidity Analyzer
Online Low Range Turbidity Analyzer
Chlorine Analyzer
Silica Analyzer
Fluoride Analyzer
DO Analyzer
Sulphide Analyzer
Online Suspended Solid Analyzer
Oil In Water Analyzer
Chloride Analyzer
Phosphate Analyzer
Hardness Analyzer
Ammonia Nitrogen Analyzer
Phenol Analyzer
UT-IN-S-N-O-H-230VAC is a flameproof tunable laser gas analyzer for industrial online analysis and environmental on-line monitoring, which can analyze O2, CO, NH3, CO2, CH4, H2O,HCl, HF and other gases in various complex conditions. It consists of a transmitter, receiver and connection box. The transmitter drives the tunable diode to emit a laser of certain wavelengths, which passes through the environment to be measured, then reaches the receiver. The receiver performs photoelectricity conversion, signal processing and spectrum data analysis to obtain the measuring result. The connection box contains I/O interface, making the connection of power cable and signal cable convenient.
Key Features
- Easy optical path adjusting, XY direction non-coupling adjusting.
- Small drift, long maintenance period, drift ≤ ±1% F.S./half year.
- "Single line" spectrum technology, free from interference of background gas.
- Integrated structure design, high stability and reliability.
- Integrated flameproof structure, consuming less purge gas compared with positive-pressure mode.
- In-situ measurement without pretreatment system avoids adsorption, blockage and damage, reduces cost.
Technical Specifications
| Parameter | Description |
|---|---|
| Measuring Principal | TDLAS (Tunable diode laser absorption spectroscopy ) |
| Optical Channel Length | 20m |
| Linearity Error | ±1%F.S. |
| Repeatability | 1% |
| Span Drift | ±1%F.S./half year |
| Zero Drift | ±1%F.S./half year |
| Maintenance Cycle | 2 times/year,clean optical window |
| Calibration Cycle | 2 times/year |
| Enclosure Rating | IP66 |
| Response Time (T) | 1s |
| Interface Signal | |
| Analog Output | 2× 4-20mA output (Isolation, max load750) |
| Analog Input (optional) | 2× 4-20mA input (temp. and press. compensation) |
| Digital Output | RS485/RS232 |
| Relay Output | 2 (24V,1A) |
| Operating Conditions | |
| Power Supply | 100~240VAC,50Hz or 24VDC |
| Purge Gas | 3 bar ~5 bar industrial nitrogen / purification |
| Ambient Temperature | (-) 20°C ~ 60°C |
| Process temperature | Up to 600°C (Option With Water Cooling uo 1000°C |
| Installation | |
| Installation Way | In-situ installation ,Cross duct type |